Shop Categories

Product Details

 4 channel 5V Relay shield extension board xbee Relay Shield V1.3 for Arduino com
4 channel 5V Relay shield extension board xbee Relay Shield V1.3 for Arduino com
MPN :
SKU : 13ARS-P47F18B
Brand :Megatronics.pk
Stock : 20pcs
Price:PKR 2200.00
4 channel 5V Relay shield extension board xbee Relay Shield V1.3 for arduino compatible


External supply voltage: 7 ~ 12 V (> 200 mA)
Maximum switching voltage relay: 240VAC / 30VDC
Maximum switching current of relay: 3A
Relay: 4
Wireless output interface: (serial) xbee / Bluetooth Bee / wireless programming module
The rotating light has two threads from the bottom for fixing with screws (enclosed)
The cable is compatible with typical servo wires. Via +5V (red) and - (brown) the module is controlled
Via the signal line (orange) the signal mode (flashing sequence) is changed. A change of mode is initiated when a PWM signal (from the RC receiver or a PWM signal from the microcontroller) is changed via the signal line (yellow)
To change the mode, the PWM signal must fall below approx. 30% (pulse duration) and then exceed approx. 60%
Possible modes: rotation, fast rotation, slow rotation, flashing, fast flashing


Dedicated Relay shields for Arduino, supporting 4 channel 3A relay control, xbee wireless module and so on.
Independent external power supply and opto-isolator.
Power apply: 7V-12V (>200mA)
Contact load capacity: 1A 250VAC , 3A 120VA/24VDC
Wireless output interface:xbee/Bluetooth Bee/Wireless Programming Module
  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Copyright © 2014, All rights reserved.